Filter
Top Products
E-47
Playback
1
Set the POWER switch to ON.
2 Press the CAMERA/VCR button to switch to
VCR mode.
3 Use the OPERATION lever and the supplied
remote control to perform the common
playback operations (see below).
Basic operations
CAMERA
VCR
Operation by the OPERATION lever Remote control
While the tape is in the stop mode, turn the lever in the
direction q to play back.
During playback, turn the lever in the direction q to use
the variable speed search mode (Page 50), then playback
with the speed of 1x will start. (The audio will not be
played back.)
Variable speed search will not start if you are using the
remote control.
While the tape is in the stop mode, turn the lever in the
direction y to fast forward the tape.
During play, move the lever y to play the tape at 10x
speed.
While the tape is in the stop mode, turn the lever in the
direction t to rewind the tape.
During play, move the lever t to rewind the tape at 10x
speed.
Turn the lever in the direction g to stop the tape.
While the tape is playing back, press this lever to set the
camera-recorder to the playback pause mode.
INDEX STOP INDEX
STILL ADV
PAUSE
STILL ADV
PLAY
INDEX STOP
V
-
/REW FF/
INDEX STOP INDEX
STILL ADV
PAUSE
STILL ADV
PLAY
INDEX STOP
V
-
/REW FF/
INDEX STOP INDEX
STILL ADV
PAUSE
STILL ADV
PLAY
INDEX STOP
V
-
/REW FF/
INDEX STOP INDEX
STILL ADV
PAUSE
STILL ADV
PLAY
INDEX STOP
V
-
/REW FF/
INDEX STOP INDEX
STILL ADV
PAUSE
STILL ADV
PLAY
INDEX STOP
V
-
/REW FF/
Tape protection mode
If you pause the camera-recorder for 5 minutes during play or shooting, it automatically stops to protect the tape.
The mode activates faster if it is cold.
AG-DVX100B_EN.book 47 ページ ２００５年１０月５日 水曜日 午前１０時５２分