Filter
Top Products
E-39
Adjusting the shutter speed (continued)
1 In the setup menus, SW MODE screen,
allocate one of the USER buttons to
SLOWSHUT. (Page 71)
2 Press the USER button you have allocated to
SLOWSHUT to enter the slow shutter mode.
Each time you press SPEED SEL, the shutter
speed changes as shown below.
• “PROCESSING…” appears on the display for
a few moments after you enter the slow
shutter mode while the camera makes the
necessary settings.
• Press the USER button you have allocated to
SLOWSHUT again to exit the slow shutter
mode and return to the previous mode.
• The slow shutter mode is also canceled if you
turn the camera off then on again.
• You cannot control the gain while in slow
shutter mode. The gain will be fixed at 0 dB.
• While shooting you cannot change the slow
shutter mode settings or exit the mode.
• If you are using a shutter speed selected with
the SPEED SEL button (Page 38) you cannot
switch to slow shutter mode (“INVALID”
appears on the screen).
First press the SHUTTER button to return to
normal (OFF), then switch to slow shutter
mode.
Set the shutter speed of the synchro scan (used
when shooting a television or computer monitor) in
the setup menus, CAMERA SETUP screen,
SYNCRO SCAN. (Page 70)
• Adjust the shutter speed to match the frequency
of the television or computer monitor to minimize
the horizontal noise that appears when shooting
such subjects.
Slow shutter mode
1/3 1/6 1/12 1/25
1/3 1/6 1/12
When progressive mode is off (50i)
When progressive mode is on (25P)
Synchro scan
You can change the progressive mode in the
setup menu with PROGRESSIVE in the SCENE
FILE screen (Page 69).
The current slow shutter speed appears on the
viewfinder and LCD screens unless you have
selected OFF in OTHER DISPLAY in the DISPLAY
SETUP screen of the setup menus.
SLOW 1/3
PUSH STILL
AG-DVX100B_EN.book 39 ページ ２００５年１０月５日 水曜日 午前１０時５２分