Filter
Top Products
E-63
Screen displays (continued)
34 Optical Image Stabilizer (OIS) display
When the CAMERA DATA item of the DISPLAY
SETUP screen of the Setup menu is set to ON,
and you are using the Optical Image Stabilizer,
is displayed even if playing back the tape as
camera data.
35 DVTC display
Appears when you have set DV IN PRESET to
ON in the setup menus, RECORDING SETUP
screen.
It does not appear when you have set REGEN for
FIRST REC TC.
36 Search number display
Displays the index numbers performed the index
search. (S1 to S9)
37 IRIS display
When the CAMERA DATA item of the DISPLAY
SETUP screen of the Setup menu is set to ON,
the F value of recording is displayed even if
playing back the tape as camera data.
38 Gain display
When the CAMERA DATA item of the DISPLAY
SETUP screen of the Setup menu is set to ON,
the F value of recording is displayed even if
playing back the tape as camera data.
If a problem occurs with this unit or tapes, the
following messages are displayed in the middle of
the screen.
UNPLAYABLE TAPE (OTHER FORMAT)
Can not playback because of the different tape
format.
COPY INHIBITED
Can not record correctly because of the input
signal copy-guarded.
UNABLE TO A. DUB (LP RECORDED)
Can not perform dubbing because the tape was
recorded with LP mode.
INCOMPATIBLE TAPE
Can not use because the tape is not the
standard for this unit (e.g. a tape for saving data).
EXTERNAL
DV DISCONNECT
When the DV CONTROL item of the OTHER
FUNCTIONS screen of the Setup menu is set to
EXT and recording without connecting external
units with DV terminal, this display appears.
AUTO OFF
When trouble occurs with tape running systems,
AUTO OFF is displayed.
When AUTO OFF is displayed, the power supply
of this device is automatically set to OFF.
CYLINDER LOCK
LOADING LOCK
UNLOADING LOCK
T REEL LOCK (Take up reel lock)
S REEL LOCK (Supply reel lock)
WARNING
When trouble occurs with camera systems,
WARNING is displayed.
FOCUS LOCK (Abnormal focus operation)
PSD NG (Abnormal vibration detected)
GYRO NG (Abnormal Optical Image
Stabilizer control)
FILE TRANS NG
Is displayed in the following cases:
• When the DV (IEEE 1394) cable is not
connected while performing FILE TRANS.
• When the connected external device is unable
to receive data while performing FILE TRANS.
FILE RECEIVE NG
Is displayed in the following cases:
• When the DV (IEEE 1394) cable is not
connected while performing FILE RECEIVE.
• When the connected external device is not set
to FILE RECEIVE mode.
In VCR mode only
S 1
SP
SQU
DVTC
TC 12 : 34 : 56 : 00
F5 . 6
18
dB
min
48 K
NOV
30 2005 23 : 59 : 59
CH1
CH2
37
35
36
34
38
Warnings
AG-DVX100B_EN.book 63 ページ ２００５年１０月５日 水曜日 午前１０時５２分