Filter
Top Products
E-61
Screen displays (continued)
9 Mic level auto control
Appears when in the setup menus,
RECORDING SETUP screen, MIC ALC, you
have selected “ON”.
10 Auto iris control displays
STD : Standard auto-iris control
SPOT : Auto iris control for spotlight
BACK : Auto iris control for backlight
compensation
11 Shutter speed
The shutter speed is normally displayed here.
“SLOW” appears when using the slow shutter
speed.
When the ZEBRA button is pressed to display
the markers (Page 32), the brightness level
around the center of the screen is indicated as
0% to 99%. “99%K“appears if the percentage is
over 99.
12 Audio sampling frequency
13 AWB error
LOWLIGHT
Appears when the brightness level adjusted by
the auto white balance is too low.
14 Audio level meter
15 Recommended ND filter
The recommended ND filter under the current
shooting conditions is displayed here.
16 Remaining tape
This is not displayed while being calculated. It is
also not displayed during intermittent recording
or slow playback.
17 Remaining battery charge
As the remaining battery charge drops, the
display changes as follows:
When the battery has completely discharged,
( ) blinks.
(When the AC adapter is being used, a display
other than may appear: this is not a sign
of malfunctioning.)
18 Monitor volume level meter
Press the AUDIO MON/VAR button to display the
level meter showing the volume level of the
sound that is output from the internal speaker
and PHONES jack.
19 Calendar
20 INDEX record display
When the USER button allocated the Index function
in advance is pressed during the recording, it will
light when recording the index signal.
When you press the USER button before
recording, it will light. (In the condition of waiting
the index signal record)
21 ND filter display
ND filter selected is displayed.
When [ND--] is displayed, the ND filter may be out
of alignment. (OFF, the position except 1/8, 1/64)
Check the position of the ND filter switch.
22 Gain display
Displays the gain value of the image amplifier
configured. When AUTO is selected, ACG is
displayed.
23 IRIS display
Displays F value.
24 AWB information display
Displays the information of white balance.
ATW: When ATW is selected.
P3.2K/5.6K: When preset is selected.
Ach/Bch: When Ach/Bch is selected.
LOCK : When ATW LOCK is selected.
25 Macro control display
26 Focus control display
Displays the focus control information with 99-00.
95 (Focal distance: infinity)
:
50 (Focal distance: approx. 1 m)
:
36 and below (Macro)
:
00 (Focal distance: approx. 2 cm)
• Depending on the zoom position, the macro
range may not be enabled.
Also, depending on the zoom position, the lower
limit value of macro range may be different.
AF:
Auto focus display
MF:
Manual focus display
CH1
CH2
34 dB 12 dB 0 dB
mmm dd yyyy hh:mm:ss
Month:
JAN (January), FEB (February), MAR (March),
APR (April), MAY (May), JUN (June), JUL
(July), AUG (August), SEP (September), OCT
(October), NOV (November), DEC (December)
Day of the month
Year: 2002 - 2089
Hours
Minutes
Seconds
AG-DVX100B_EN.book 61 ページ ２００５年１０月５日 水曜日 午前１０時５２分