Filter
Top Products
Chapter 7 Menu description tables
82
SDC615
00h00m02s00f
:
00h04m59s29f
:
23h59m59s29f
The shortest time is two seconds.
CUF
INTERVAL REC
MODE
ON
ONE SHOT
OFF
For setting the INTERVAL REC function.
ON (MEMORY):
Interval recording is possible in single-
frame units using memory.
ONE SHOT:
Recording is performed only once for the
time set in the REC TIME item, after which
it stops.
OFF: Interval recording is not performed.
F
REC TIME
SDC905
00s01f
:
59s29f
For setting the recording time (one cut).
The shortest time is one frame.
PAUSE TIME
SDC905
00h00m00s01f
:
00h04m59s29f
:
23h59m59s29f
For setting the recording pause time.
The shortest time is one frame.
CUF
SDC615
02s00f
:
59s29f
The shortest time is two seconds.
CUF
CUF
RETAKE MODE ON
OFF
For selecting whether or not to allow retake
operations (MODE CHECK switch + RET
switch).
<Note>
The REC TIME, PAUSE TIME and TOTAL REC TIME values
are given in terms of the drop frames during drop frame
operations and in terms of non-drop frames during non-drop
frame operations. The TAKE TOTAL TIME value is the actual
time. This means that a fraction may apply to the TOTAL
REC TIME depending on the setting used.
Example in the case of drop frame operation
PAUSE TIME 02s00f
REC TIME 02s00f
TAKE TOTAL TIME 40min
TOTAL REC TIME 19m59s06f
The underlining in the variable range column indicates the setting in the preset mode.
F
TAKE TOTAL TIME NONE
:
5day
For setting the time required for shooting.
Select a setting from NONE (shooting
continues until it is stopped manually) to
5DAY (5 days).
NEWS REC MODE
SDC615
OFF
0.2SEC
:
2.0SEC
For setting the NEWS REC time.
Item/
Data storage
Variable
range
Remarks
TOTAL REC TIME 00m00s01f
:
90m59s29f
OVER 100min
NONE
For displaying the total recording time. The
setting for this time cannot be changed.
The total time yielded by adding the REC
TIME, PAUSE TIME and TOTAL TAKE TIME
is displayed.
AUDIO REC OFF
ON
For setting whether or not to record the
sound.
PRE REC MODE
SDC905
OFF
0SEC
:
6SEC
For setting the PRE REC function.
OFF: The PRE REC function is not
operable.
0-6SEC: The duration for which pre-
recording can be performed after
the REC START button is pressed
is set here.
7-2-3 REC FUNCTION
START DELAY 0SEC
:
10SEC
For setting the time taken until recording is to
start after the REC START button is pressed
in the INTERVAL REC mode.
CUF
CUF
CUF
CUF
CUF