Filter
Top Products
Chapter 7 Menu description tables
88
7-3-9 KNEE/LEVEL
Item/
Data storage
Variable
range
Remarks
MASTER PED –200
:
+000
:
+200
For performing the MASTER PEDESTAL
setting.
$ MANUAL KNEE
ON
OFF
For setting the mode which is to be established
when the AUTO KNEE switch is at OFF.
The
KNEE POINT/SLOPE setting value is active
when ON is selected.
KNEE POINT 70.0%
:
85.0%
:
107.0%
For setting the KNEE POINT position in 0.5%
steps.
KNEE SLOPE 00
:
50
:
99 (98)
For performing the KNEE width setting.
Same as KNEE OFF when set to 0.
<Note>
The range of values that can be selected
using the AJ-EC3P is 00 to 98.
WHITE CLIP LVL 90%
:
105%
:
109%
For performing the WHITE CLIP LEVEL
setting.
A.KNEE POINT 80%
:
85%
:
107%
For setting the AUTO KNEE POINT position
in 0.5% steps. This item is active when the
OUTPUT/AUTO KNEE selector switch is set
to CAM.AUTO KNEE ON.
A.KNEE LVL 100
:
105
:
109
For performing the AUTO KNEE level setting.
A.KNEE
RESPONSE
1
:
4
For setting the AUTO KNEE response speed.
$ WHITE CLIP
ON
OFF
For selecting ON or OFF for the WHITE CLIP
function. The WHITE CLIP LVL setting value
is active when ON is selected.
7-3-11 FLARE
Item/
Data storage
Variable
range
Remarks
R FLARE 000
:
100
For performing the R FLARE setting.
G FLARE 000
:
100
For performing the G FLARE setting.
B FLARE 000
:
100
For performing the B FLARE setting.
7-3-10 GAMMA
Item/
Data storage
Variable
range
Remarks
MASTER GAMMA 0.35
:
0.45
:
0.75
For setting the MASTER GAMMA in 0.01
steps.
R GAMMA –15
:
+00
:
+15
For setting the R channel GAMMA.
B GAMMA –15
:
+00
:
+15
For setting the B channel GAMMA.
The underlining in the variable range column indicates the setting in the preset mode.
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
SUFE
SCUFE
SCUFE
SCUFE
SCUFE
SCUFE
<Note>
Items with $ in front of their names are set by the PAINT
MENU SW ($) R/W menu items on the <CARD R/W
SELECT> screen.
Items without $ in front of their names are set by the PAINT
MENU LEVEL R/W menu item.
For details, refer to “7-6-2 CARD R/W SELECT.”