Filter
Top Products
10
Changing the setting value of a setting item
A number of items and the set values are displayed on the setting
screen at the lowest level
1
Turn the SELECT dial to move the cursor to the menu
item you want to set, and then press the SELECT dial
The setting value of the selected menu item starts flashing and you
can change it
SETTING1
CCU MODE 1080/59.94i
SDI RETURN1 HD
SDI RETURN2 HD
SDI OUTPUT1&2 HD
SDI OUTPUT3&4 HD
NORMAL/PM PM
COMPOSITE
NORMAL/PM PM
2
Turn the SELECT dial to change the value, and then
press the SELECT dial
Turning the SELECT dial changes the setting value and pressing the
SELECT dial confirms the setting value
SETTING1
CCU MODE 1080/59.94i
SDI RETURN1 SD
SDI RETURN2 HD
SDI OUTPUT1&2 HD
SDI OUTPUT3&4 HD
NORMAL/PM PM
COMPOSITE
NORMAL/PM PM
Once the setting value has been confirmed, the flashing stops, and the
cursor can be moved from one menu to another
In some cases, the setting is reflected when the setting value is changed
in the flashing state; in other cases, it is reflected when the SELECT dial
is pressed to confirm the setting value
Menu items with multiple setting items on one line and text
input menu items
1
Turn the SELECT dial to move the cursor to the menu
item you want to set, and then press the SELECT dial
The cursor becomes “” and you can use the SELECT dial to move
the cursor to a setting item in the selected menu item
BAR ID
BAR ID SWITCH OFF
BRIGHTNESS 100%
ID1 POSITION V:00 H:00
ID1 ##
ID2 POSITION V:01 H:00
2
Turn the SELECT dial to move the cursor to the item you
want to set, and then press the SELECT dial
The setting value of the selected item starts flashing and you can
change it
BAR ID
BAR ID SWITCH OFF
BRIGHTNESS 100%
ID1 POSITION V:00 H:00
ID1 ##
ID2 POSITION V:01 H:00
3
Turn the SELECT dial to change the value, and then
press the SELECT dial
Turning the SELECT dial changes the setting value (or characters),
and pressing the SELECT dial confirms the setting value (or
characters)
BAR ID
BAR ID SWITCH OFF
BRIGHTNESS 100%
ID1 POSITION V:02 H:00
ID1 ##
ID2 POSITION V:01 H:00
When the setting value is confirmed and the flashing stops, you can
move the cursor
If you press the SELECT dial while the cursor is on the left of a menu
item, the cursor becomes “” and you can select the menu item
BAR ID
BAR ID SWITCH OFF
BRIGHTNESS 100%
ID1 POSITION V:02 H:03
ID1 ##
ID2 POSITION V:01 H:00
Menu operations (Continued)