Filter
Top Products
3
Picture monitor (PM) displays
Switching the display
Display the camera statuses, warnings, and other information on the
picture monitor using the operation panel of the ROP
Press the CHARA button of the ROP to display the desired information
The camera statuses, warnings, and other information are cleared when
the CHARA button of the ROP is held down
CHARA button
ROP: AK-HRP200
Transition of displays
When trouble is detected, warning information is automatically displayed on the picture monitor
Even if status information or operation information is already displayed on the picture monitor when trouble is detected, priority is given to the display of
the warning information
The descending sequence of priority for the displays on the picture monitor is as follows: WARNING displays → AUTO displays → STATUS displays →
REMOTE OPERATION menu displays → CCU menu displays → OPERATION displays → no display
When the warning information with the highest priority disappears, the warning information with the next highest priority appears
Sequence of
priority
What is displayed on the
screen
ROP connected
Yes No
Higher
Lower
WARNING displays Warnings are automatically displayed when
trouble is detected
Self-recovery
The warning displays are cleared
Press the CHARA button of the ROP
The display switches to the status screen (IRIS
or status display)
Hold down the CHARA button of the ROP
The warning displays are cleared
Warnings are automatically displayed when
trouble is detected
Self-recovery
The warning displays are cleared
Press the SELECT dial on the unit
When the transition source screen is displayed:
The display switches to the transition source
screen
When the transition source screen is not
displayed:
The warning displays are cleared
AUTO displays Automatically displayed Automatically displayed
STATUS displays Perform display operations using the CHARA
button of the ROP
Press the CHARA button of the ROP
No display → (WARNING) → IRIS → status
displays → Status1 → Status2 → Status3 →
Status4 → Status1
Hold down the CHARA button of the ROP
The status displays end
REMOTE OPERATION menu
displays
When a menu of the CCU
(this unit) is displayed while
the REMOTE OPERATION
menu is displayed, the
REMOTE OPERATION menu
disappears
Display by pressing the CHARA button of the
ROP
Operations using the SELECT dial of the ROP
CCU menu displays
When the REMOTE
OPERATION menu is
displayed while a menu of the
CCU (this unit) is displayed,
the menu of the CCU (this
unit) disappears
Display by pressing the MENU button on the unit
Operations using the SELECT dial on the unit
Display by pressing the MENU button on the unit
Operations using the SELECT dial on the unit
OPERATION displays Automatically displayed Automatically displayed
No display —— ——