Filter
Top Products
26
Web settings
You can connect the unit and a computer, and configure various settings
from the Web browser screen
Use a LAN cable (crossover cable) to directly connect the unit’s LAN
connector for computer connections and the computer
Set an IP address for the computer within the private address range
while ensuring that it is different from the address of the unit Set the
subnet mask to the same address as the unit
Network settings of the unit (default settings)
IP address: 192168020
Subnet mask: 2552552550
Port number: 80
Default gateway: 19216801
Note
Menu operations
Start the Web browser, and enter “http://192168020” in the [Address]
box of the Web browser
If the IP address is changed, the URL will also be different
If this is the case, use the new IP address in the URL (http://new IP
address/)
Moving from one menu to another
To move from one menu to another, select the desired menu on the left
of the screen
This is equivalent to “TOP MENU” displayed on the
picture monitor
When either “OPERATION” or “MAINTENANCE” is
selected above, the corresponding menu items are
displayed here
In the example shown, the OPERATION menu items
are displayed
The setting screen corresponding to the menu item
selected here is displayed on the right
When using Internet Explorer, do not use [ Back] or [ Next]
Displaying the setting screens
Select a menu item on the left of the screen to display the setting screen
corresponding to that item