Filter
Top Products
34
PM OPERATION STATUS Screen
This menu is used to set ON or OFF for the operation items to display
on the picture monitor
indicates the factory default setting
Item
Setting
value
Remarks
STATUS
DISPLAY TIME
0 sec
2 sec
4 sec
Set the length of the status display time
Set the time in 1-second increments
When the status of an item that has
been set to ON on this menu has
changed, the status is displayed on the
picture monitor for just the length of
time that was set for STATUS DISPLAY
TIME
When 0 (zero) is set, the operations
(manual and auto) are not displayed
on the picture monitor
MANUAL OPERATION STATUS
MASTER GAIN
ON
OFF
Set the status display for when the
master gain is changed
SHUTTER
ON
OFF
Set the status display for when the
shutter speed is changed
LENS EXT
ON
OFF
Set the status display for when the lens
extender is changed
FILTER
ON
OFF
Set the status display for when the filter
is changed
SCENE FILE
ON
OFF
Set the status display for when the
scene file is changed
REF LOAD
ON
OFF
Set the status display for when the
reference file is loaded
AUTO
OPERATION
STATUS
ON
OFF
Set the status display for when AWB,
ABB, or ASU is executed
SYSTEM Screen
This menu is used to initialize the menu settings
To return the menu settings to the factory default settings, add a mark
to INITIALIZE and then click [EXECUTE]
The following data is initialized
Items in the OPERATION menu
Items in the MAINTENANCE menu
(Excluding, however, the NETWORK screen, VERSION screen,
SYSTEM screen, and SD CARD screen)
Furthermore, the setting information (following data) in the REMOTE
OPERATION menu* is also initialized
Items in the SD DETAIL menu
Items in the SYSTEM menu
(Excluding, however, each of the HD BAR, MIC1 GAIN, MIC1 AMP,
MIC2 GAIN, and MIC2 AMP items)
*: The REMOTE OPERATION can be operated with the ROP
Web settings (Continued)