Panasonic AK-HCU200P Camera Accessories User Manual


 
5
Status displays (page 1 of 4)
From the status display screen, press the CHARA button of the ROP to
display the first page of the status displays
1/4 -STATUS1-
CAM NO. 1
MASTER GAIN 0dB
5600K OFF
GAMMA OFF
KNEE OFF
WHITE CLIP OFF
BLACK GAMMA OFF
HD DETAIL OFF
HD SKIN DETAIL OFF
MATRIX OFF
Item Display
range
Remarks
CAM No 1
19
The camera number is displayed here
MASTER GAIN Setting
values on
camera
The master gain value is displayed
here
For the setting values, refer to the
Operating Instructions for the camera
5600K OFF
ON
The status of the 5600K switch is
displayed here
OFF: 3200K, ON: 5600K
GAMMA OFF
ON
The status of the gamma correction is
displayed here
KNEE OFF
ON
The status of the knee function is
displayed here
This function attenuates those parts
that have exceeded the prescribed
level (knee point) of the video signals
to minimize saturation
WHITE CLIP OFF
ON
The status of the white clip function is
displayed here
BLACK GAMMA OFF
ON
The status of the black gamma function
is displayed here
This function changes the
amplification rate of the video signals
in the low-brightness areas
HD DETAIL OFF
ON
The status of the detail function for the
HD signals is displayed here
This function (detail enhancer)
enhances (makes sharper or softer)
the detail image quality of the video
output signals
HD SKIN DETAIL OFF
ON
The status of the skin tone detail
function for the HD signals is displayed
here
This function minimizes or
emphasizes the detail components
applied to the skin tone
MATRIX OFF
ON
The status of the matrix function is
displayed here
This function compensates the
saturation and hue
Status displays (page 2 of 4)
From the status displays (page 1 of 4) screen, press the CHARA button
of the ROP to display the second page
2/4 -STATUS2-
SHUTTER OFF
ND FILTER 1
LENS EXTENDER 1.0
AUTO IRIS OFF
SCENE FILE SCENE1
SD DETAIL OFF
ASU REF USER1
ASU MODE OUT FULL
Item Display
range
Remarks
SHUTTER Setting
values on
camera
The speed of the electronic shutter is
displayed here
For the setting values, refer to the
Operating Instructions for the camera
ND FILTER 1
4
The names of the ND filters are
displayed here
The names (each consisting of 4
characters) correspond to filter 1, 2, 3
and 4
Displayed as the filter names are the
names that were set using the unit’s
menu
LENS
EXTENDER
10
20
The magnification of the lens extender
is displayed here
AUTO IRIS OFF
ON
The status of the auto IRIS function is
displayed here
SCENE FILE SCENE1
SCENE4
OFF
The selected scene file is displayed
here
SD DETAIL OFF
ON
The status of the detail function for the
SD signals is displayed here
ASU REF USER1
USER2
USER3
FACTORY
The reference file used during auto
setup is displayed here
ASU MODE OUT FULL
OUT EASY
The auto setup mode is displayed here
Picture monitor (PM) displays (Continued)