Panasonic BB-HCM371A Security Camera User Manual


 
Operating Instructions
102
5. Set the Lens Position When Triggered setting, and click [Next>].
Note
If you enable the Lens Position When Triggered setting, buffer/transfer starts
after the camera turns to the alarm position.
Clicking [<Back] takes you back to the previous page.
Clicking [Cancel] takes you back to the Image Buffer/Transfer page
without saving changes.
6. Set the image settings, and click [Next>].
Clicking [<Back] takes you back to the previous page.
Clicking [Cancel] takes you back to the Image Buffer/Transfer page
without saving changes.
Setting Description
Lens Position
When Triggered
Set [Move to alarm position] to move the lens to the alarm
position (see page 25) when the alarm signal is detected.
Setting Description
Image
Resolution
Select image resolution (640 x 480, 320 x 240 (default) or
160 x 120 pixels) to buffer or transfer.
Image Quality Select the image quality.
[Favor Clarity] optimizes for good quality.
[Standard] offers standard quality.
[Favor Motion] optimizes for enhanced motion.
[Mobile Phone] is for a transfer to a cell phone.
Note
640 x 480 pixels cannot be set for a transfer to a cell
phone.