Filter
Top Products
Operating Instructions
110
11. Click [Go to Image Buffer/Transfer page].
• The Image Buffer/Transfer page is displayed.
Notes
• If you set a short interval to transfer image to a cell phone, many E-mails
may be sent to it leading to a large phone bill. Therefore, we recommend
you to set a long interval. 1 image per second frequency is recommended.
• Alarm transfer stops its operations until the camera finishes all transfers.
For example, if the camera transfers 3 images per minute and 6 images
in total, the alarm detection will be in the following operation.
• If you are buffering images on the internal memory, the following
operations also delete all buffered images.
• Turning off the camera.
• Saving the Date and Time page.
• Restarting, updating firmware or resetting the camera to factory
default.
Detectable DetectableUndetectable
1st 2nd 3rd 4th 5th 6th
120 seconds
An alarm signal is detected.