Filter
Top Products
Operating Instructions
[For assistance, please call: 1-800-272-7033] 145
2. Click each button to execute the program.
Notes
• For the first time installation or after pressing the FACTORY DEFAULT
RESET button, you must select [Automatic Setup (Local Access Only)]. To
start the Manual Setup, execute Automatic Setup (Local Access Only)
first, and then start the Setup Program to execute the Manual Setup.
• See Installation/Troubleshooting for the local and Internet access setup.
Manual Setup window
Set up each parameter seeing page 44—page 46.
• If more than 20 minutes have passed since the camera was turned
on, the camera cannot be set up from the Setup Program. If the
camera cannot be set up, restart the camera.
• If "Camera setup completed" is displayed, click [Close] to finish the
Manual Setup.
3. Close all Setup windows.
Sets up the camera to view on
the LAN.
Sets up the Internet access to
the camera.
Manually sets up the camera.
Disables IPsec. If disabled, the
button is displayed gray.
Displays the Setup page (see
page 39).