Filter
Top Products
Operating Instructions
92
4. Set the time, and click [Next>].
Note
The timer works by an internal clock. Set the date and time before using timer
buffer/transfer (see page 68).
• Clicking [<Back] takes you back to the previous page.
• Clicking [Cancel] takes you back to the Image Buffer/Transfer page
without saving changes.
5. Set the image settings, and click [Next>].
• Clicking [<Back] takes you back to the previous page.
• Clicking [Cancel] takes you back to the Image Buffer/Transfer page
without saving changes.
Setting Description
Enable Image
Buffer/Transfer
• Check the box to enable the buffer/transfer. Clear the box
to disable it.
Tr i g ge r • Selecting [Timer] enables the camera to buffer/transfer the
image by timer.
• Selecting [Alarm 1 or 2] enables the camera to buffer/
transfer the image by alarm signal.
Setting Description
A day of the
week
• Check the box to enable the day. Clear the box to disable
it.
Active Time of
Tr i g ge r
• Select the [Always] option when you do not specify the
time period. If you specify the time period, select the time
period option and set the time period.