Filter
Top Products
26
■ How to Carry out Recognition
The following is how to control the iris camera when a user (you), whose iris data has been enrolled in the iris server, carries
out recognition. This document will explain about:
• Recognition by an iris camera only
• Recognition by an iris camera and a card reader
Note:
To carry out the recognition by an iris camera only, your iris data needs to have been sent to recognition cameras or
enrolled in the iris server. If your iris data has not been enrolled, refer to system administrators for enrollment.
● Recognition by an Iris Camera only
Stand (Sit down) in front of the iris camera.
Follow the directions by system administrators or operators.
1
Move your face so as your eyes are positioned within 50 cm
{1.64 ft.} from the iris camera.
• The voice guidance will say, "Please look into the mirror."
• The guide indicator or voice guidance will start.
2
Position your eyes in the mirror by referring to " How to Position Your Eyes in the Mirror" (pp. 21 to
23).
3
Move your position slowly by following the guide indicator or
voice guidance.
•When the distance between the camera and you is too great, the
voice guidance will say, "Please move a little closer."
•When the distance between the camera and you is too short, the
voice guidance will say, "Please move back a little."
•When your position is right-of-centre, the voice guidance will say,
"Please move to the left a little."
•When your position is left-of-centre, the voice guidance will say,
"Please move to the right a little."
During the guidance, the near-infrared light will blink.
Keep your eyes opened widely during the guidance.
4