Panasonic DMC-F1PP Digital Camera User Manual


 
Preparation
16
ª Access to the card
When the card is being accessed, the
flash/access indicator 1 and card
access indication 2 lights.
When the flash/access indicator 1 and
the card access indication 2 lights;
Do not turn off the camera.
Do not remove the battery or pull out the
card.
Do not disconnect the DC cable when
using the AC adaptor.
The card and the card contents may be
destroyed and the camera may not
operate normally.
As there is a risk that the data on the
card may be damaged or erased due to
the electrical noise, static electricity or
the defects of camera/card, please back
up your data on your PC using USB
connection. (P77)
ª SD Memory Card (supplied) and
MultiMediaCard (optional)
The SD Memory Card and
MultiMediaCard are small, lightweight,
removable external cards. The SD
Memory Card is equipped with a write
protection switch that can inhibit writing
and formatting. (When the switch is
moved towards the [LOCK] side, it is not
possible to write or delete data on the
card and format it. When the switch is
unlocked, these functions become
available.)
SD Memory Card
RP-SDH512 (512MB)
RP-SDH256 (256MB)
RP-SD128BJ (128MB)
RP-SD064B (64MB)
RP-SD032B (32MB)
RP-SD016B (16MB)
RP-SD008B (8MB)
MultiMediaCard
The reading/writing speed
of MultiMediaCards is
slower than SD cards.
When MultiMediaCards are
used, the performance of
certain features may be
slightly slower than advertised.
After recording motion images using the
MultiMediaCard,
the flash/access
indicator and
the card access indication
may appear for a while, but this is not a
malfunction.