Filter
Top Products
Recording images (basic)
25
Recording images (basic)
Taking Pictures
By only pressing the shutter button, the
exposure (shutter speed and aperture value)
will be automatically adjusted and the picture
will be taken.
[Preparation]
• Insert the card. (P15)
• Set the power switch to [ON]. (P17)
1
Set the mode dial to normal picture
mode [ ].
2
[A
Optical
finder]
Centre the subject in the AF target 1
inside the optical finder and press
the shutter button halfway.
[B LCD monitor]
After centering the subject in the
AF area 2
on the LCD Monitor, press
the shutter button halfway.
• When the focus is adjusted, the focus
indication [
¥
]
3
appears.
• When the focus indication flashes, the focus
is not adjusted. Press the shutter button
halfway to adjust the focus again.
• The shutter speed and the aperture value
4
are automatically adjusted and displayed on
the LCD Monitor.
• When the subject is out of the AF area, use
the AF/AE lock. (P47)
3
Press the shutter button fully to take
the picture.
• After taking a picture, when the auto review
(P71) is set to [1 SEC.]/[3 SEC.], the picture
is displayed on the LCD Monitor for 1 or 3
seconds.
2,3
1
2
F2.8
1/250
19
2048