Filter
Top Products
Recording images (advanced)
52
Taking Pictures using Burst Mode
By continuously pressing the shutter button, it
is possible to record in burst mode.
[Preparation]
• Set the mode dial
except for
[
]
/
[ ]. (P22)
1
Press [ ].
• Every time you press it, what is displayed
changes as shown below.
: High speed
: Low speed
When these indicators are not displayed,
burst mode is cancelled.
2
Press the shutter button halfway to
lock the focus, then press it fully to
take pictures in sequence.
• It is possible to record 4 frames in 1 second in
burst mode, at a shutter speed higher than 1/60,
but the flash does not fire simultaneously.
• If the flash fires, it is possible to record only
1frame.
• In simple mode
[
], the shutter speed is fixed
to the low speed. (P27)
• You cannot take still pictures with audio in the
burst mode.
• When setting auto bracket and the burst mode
simultaneously, auto bracket will be performed.
• Burst mode will not perform as described if a
MultiMediaCard is used in place of SD Memory
Card. The reading/writing speed of
MultiMediaCard is slower than SD Memory Card.
Burst
speed
Number of recordable
pictures
4 frames/
second
5 frames 8 frames
2 frames/
second
5 frames 8 frames
H
L