Filter
Top Products
Recording images (advanced)
49
Setting the White Balance
Auto White Balance is designed to
automatically adjust the camera to produce
natural flesh tones. In most situations it works
fine. In some situations where several
different types of lighting are present,
enhanced performance can be achieved by
setting the white balance manually.
[Preparation]
• Set the mode dial
except for [
]
/[
]/[ ].
(P22)
1
Press the [MENU] button.
2
Press 3/4 to select [W.BALANCE].
3
Press 2/1 to select the mode.
•AUTO:
if the auto white balance is set
• (Daylight):
for recording outdoors on a bright day
• (Cloudy):
for recording under a cloudy and shady sky
• (Halogen):
for recording under halogen lighting
• (White set):
for manual setting (Read the following page
where the manual setting is explained in
detail)
4
Press the [MENU]
button.
• The menu will disappear.
• The setting of the white balance is applied to the other recording modes.
• In simple mode
[
] or motion image mode [ ], the white balance is fixed to [AUTO].
• When taking a picture with the flash, the white balance will be automatically adjusted
(except for manual white balance setting), but the white balance may not be properly
adjusted when the flash light is insufficient.
1,4 2,3
REC
1/3
SETUP
QUALITY
W.BALANCE
SPOT MODE
PICT.SIZE
1600
SELECT SET EXIT
MENU
2,3