Filter
Top Products
Recording images (basic)
28
Checking the Captured Picture (Review)
After taking a picture, the Auto review (P71)
feature will cause the captured picture to be
displayed on the LCD monitor for the
designated time - 1 or 3 seconds. You may
also check the picture using the method
described below.
1
After taking a picture, press the
4
/[REVIEW/SET]
button.
• The last captured picture is displayed for
about 5 seconds. Press the zoom button
[ ], the captured picture is zoomed
4times (
A)
and 8 times if you press it once
again. You can also change the position with
3
/
4
/
2
/
1
.
• You can check the previous or following
picture with
2
/
1
.
ª Erasing the captured picture during
the review
1
Press [ ].
2
When the message [DELETE THIS
PICTURE?] is displayed, press 2
/
1
to select [YES].
3
Press the
4
/[REVIEW/SET]
button.
• The picture is erased.
• Once erased, pictures cannot be recovered.
• In motion image mode [ ], Review cannot be
used.
1,
2,3
1
REVIEW1
81
DELETEEXIT
DELETE
4
REVIEW4
1
DELETE SINGLE
DELETE THIS PICTURE?
YES NO
SET
SELECT
MULTI/ALL
2