Technical use
66
Adding Audio to Recorded Pictures
(Audio Dubbing)
It is possible to add a 10-second narration to
a recorded picture.
[Preparation]
• Set the mode dial to playback [ ]. (P22)
1
Press the [MENU] button.
2
Press 3/4 to select [AUDIO DUB.]
and then press 1
.
3
Press 2/1 to select the picture.
4
Press the 4/[REVIEW/SET]
button, to
start audio recording
.
(1 Microphone)
• When audio has already been recorded,
after the audio dubbing the original audio is
overwritten.
• When audio has already been recorded, this
message is displayed “OVERWRITE AUDIO
DATA?”. Then press
2/1
to select [YES]
and press the
4
/[REVIEW/SET] button, to
start audio recording.
5
Press the 4/[REVIEW/SET]
button, to
stop audio recording
.
• Even if you do not press the
4
/[REVIEW/SET] button, after about
10 seconds the audio recording stops
automatically.
6
Press the [MENU] button.
• The menu will disappear.
• Adding audio will use additional memory. Using
this feature will result in fewer images being able
to be saved.
• The audio dubbing cannot be used with motion
images.
• The audio dubbing cannot be used with
protected images. (P63)
1,6 2,3,4,5
PROTECT
SLIDE SHOW
SETUP
PLAY
1/2
RESIZE
AUDIO
DUB.
SELECT
START
MENU
EXIT
SELECT SET EXIT
MENU
3,4
2
DPOF PRINT
1000001
2048
AUDIO DUB.
1/10