Editing
63
Protecting Images on the Card
Using this feature, important photos can be
protected from accidentally being deleted.
This feature cannot protect photos or any
data on the Card if the entire card is
formatted.
[Preparation]
• Set the mode dial to playback [ ]. (P22)
[Single setting/to cancel]
1
Press the [MENU] button.
2
Press 3/4 to select [PROTECT] and
then press 1
.
3
Press 3/4 to select [SINGLE] and
then press 1
.
4
Press 2/1 to select 1 image
.
5
Press the 4/[REVIEW/SET] button.
• The protect icon
1
appears.
• By pressing
4
/[REVIEW/SET] again, the
protection is cancelled and the icon will
disappear.
6
Press the [MENU] button twice.
• The menu will disappear.
[Multi setting/to cancel, To cancel all
settings]
1
The method is the same as in “Writing
the Print Information to the Card (DPOF
Setting)”. (P60~P62)
• Formatting the card will erase all the data on the card, even if you protect the images in this
procedure.
• When trying to delete a protected file, these messages are displayed “THIS PICTURE IS
PROTECTED” or “PROTECTED PICTURES REMAIN UNDELETED”. If you want to delete
this file, cancel the protect setting first.
• The protect setting is effective only in this camera.
• Sliding the SD Memory Card Write-Protect switch to [LOCK] prevents the picture from
deletion even if the protection is not set.
• The audio dubbing cannot be used with protected images. (P66)
1,6 2,3,4,5
PROTECT
DPOF PRINT
SLIDE SHOW
AUDIO DUB.
SINGLE
MULTI
SETUP
PLAY
1/2
RESIZE
CANCEL
SELECT SET EXIT
MENU
2,3
4,5
PROTECT THIS
SET
SELECT
EXIT
1000001
1/10