Panasonic DMC-FX100 Digital Camera User Manual


 
Basic
28
VQT1F52
Picture size and maximum zoom
magnification
(±: Available, —: Not available)
Extended optical zoom mechanism
When you set the picture size to [ ]
(3M EZ) (3 million pixels), the 12M
(12.2 million pixels) CCD area is cropped to
the center 3M (3 million pixels) area,
allowing a picture with a higher zoom effect.
•The optical zoom is set to Wide (1k)
when the camera is turned on.
•If you use the zoom function after focusing
on the subject, focus on the subject again.
•The lens barrel extends or retracts
according to the zoom position. Take care
not to interrupt the motion of the lens
barrel while the zoom lever is rotated.
•In motion picture mode [ ], the zoom
magnification is fixed to the value set at
the start of recording.
•“EZ” is an abbreviation of
“Extended optical Zoom”.
•If you set a picture size that activates the
extended optical zoom, the extended
optical zoom icon [ ] is displayed on the
screen when you use the zoom function.
•The zoom will stop moving for an instant
near [W] (1k) when the extended optical
zoom is used. This is not a malfunction.
•The indicated zoom magnification is an
approximation.
•In motion picture mode [ ] and
[HIGH SENS.] or [HI-SPEED BURST] in
scene mode, the extended optical zoom
does not work.
You can zoom at high speed from Wide to
Tele by pressing [E.ZOOM].
The zoom magnification differs depending
on the picture size that is set.
Aspect
ratio
(P62)
Picture size
(P26, 63)
Maximum
zoom magnifi-
cation (Tele)
Extended
optical
zoom
/(12M)
3.6k (10.5M)
(9M)
(8M EZ)
4.4k
± (7M EZ)
(6M EZ)
(5M EZ)
5.6k
±
(4.5M EZ)
(3.5M EZ)
(3M EZ)
(2M EZ)
/
(0.3M EZ)
7k
±
/
(2.5M EZ)
(2M EZ)
Using the Easy zoom
DMC-FX100ENG.book 28 ページ 2007年5月16日 水曜日 午後3時22分