Filter
Top Products
Advanced (Playback)
86
VQT1F52
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P76)
You can set protection for pictures you do
not want to be deleted by mistake.
Press 3/4 to select [SINGLE],
[MULTI] or [CANCEL] and then
press [MENU/SET].
∫ Single setting
1 Press 2/1 to select the picture
and then press 4 to SET/
CANCEL.
2 Press [MENU/SET] twice to close
the menu.
∫ Multi setting/To cancel all settings
Perform the same operation as in
“[DPOF PRINT]”. (P84 to 85)
•If you press [MENU/SET] while canceling
protection, the canceling will stop halfway.
•The protect setting may not be effective
on other equipment.
•If you want to delete protected pictures,
cancel their protection.
•Even if you protect pictures in the built-in
memory or a card, they will be deleted if
the built-in memory or the card is
formatted.
•Even if you do not protect pictures on an
SD Memory Card or an SDHC Memory
Card, they cannot be deleted when the
card’s Write-Protect switch B is set to
[LOCK].
•The following functions cannot be used
with protected pictures.
–[ROTATE]
–[AUDIO DUB.]
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P76)
You can add the audio after taking a
picture.
1 Press 2/1 to select the picture
and then press 4 to start audio
recording.
[PROTECT]
Preventing accidental erasure of
pictures
[SET]
The protect icon [ ] A
appears.
[CANCEL]
The protect icon [ ] A
disappears.
MENU
/
SET
MENU
/
SET
A
[AUDIO DUB.]
Adding audio after taking pictures
2
MENU
/
SET
DMC-FX100ENG.book 86 ページ ２００７年５月１６日 水曜日 午後３時２２分