Advanced (Playback)
85
VQT1F52
∫ Multi setting
1 Press 2/1 to select the picture to
print and then press 3/4 to set
the number of prints.
•The number of prints icon [ ] B
appears.
•Repeat the above procedure. (You
cannot set all the pictures at one time.)
•The number of prints can be set from
0 to 999. The DPOF print setting is
canceled when the number of prints is
set to [0].
2 Press [MENU/SET] twice to close
the menu.
∫ To cancel all settings
1 Press 3 to select [YES] and then
press [MENU/SET].
2 Press [MENU/SET] to close the
menu.
•DPOF print settings on the built-in
memory are canceled when a card is
not inserted. DPOF print settings on the
card are canceled when a card is
inserted.
∫ To print the date
After setting the number of prints, set/
cancel printing with the recording date by
pressing [DISPLAY].
•The date print icon [ ] C appears.
•When you go to a photo printing store for
digital printing, be sure to order the
printing of the date additionally if required.
•Depending on the photo printing store or
the printer, the date may not be printed
even if you set to print the date. For further
information, ask at your photo printing
store or refer to the operating instructions
for the printer.
•You cannot set date printing if the pictures
have been stamped with the date stamp.
•If you set [DATE STAMP] for pictures that
have been set for date printing, the date
printing setting is canceled.
•DPOF is an abbreviation of “Digital Print
Order Format”. This feature allows you to
write print information to media and then
use the information on a DPOF-compliant
system.
•DPOF print setting is a convenient
function when printing pictures with a
printer that supports PictBridge. The date
printing setting on the printer may take
priority over the date printing setting on
the camera. Check the date printing
setting on the printer also. (P94)
•It is necessary to delete all previous
DPOF print information made on other
equipment when setting DPOF print on
the camera.
•If the file is not based on the DCF
standard, the DPOF print setting cannot
be set.
B
MENU
/
SET
C
DATE
DMC-FX100ENG.book 85 ページ 2007年5月16日 水曜日 午後3時22分