Advanced (Playback)
82
VQT1F52
•If you take pictures when aiming the
camera up or down, it may not be possible
to display the pictures vertically.
•The picture may be slightly blurred when
the camera is connected to the TV with
the AV cable (supplied) and played back
vertically.
•When you play back pictures on a PC,
they cannot be displayed in the rotated
direction unless the OS or software is
compatible with Exif. Exif is a file format
for still pictures which allows recording
information etc. to be added. It was
established by “JEITA (Japan Electronics
and Information Technology Industries
Association)”.
•Rotated pictures are displayed rotated
when they are played back in review
playback and playback zoom however are
displayed without being rotated when they
are played back in multi playback.
•It may not be possible to rotate pictures
that have been recorded with other
equipment.
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P76)
You can stamp the date and time of
recording, the age and the travel date on
the recorded pictures.
It is suitable for regular size printing.
(Pictures with a picture size larger than
[ ] will be resized when stamping the
date etc. on them.)
Press 3/4 to select [SINGLE] or
[MULTI] and then press [MENU/
SET].
•The date information cannot be
stamped on the following pictures.
–Pictures recorded without setting the
clock
–Pictures recorded with other
equipment
– Pictures that were previously stamped
with [DATE STAMP]
–Motion pictures
–Pictures with Audio
∫ Single setting
1 Press 2/1 to select the picture
and then press4.
2 Press 3/4/2/1 to select
[SHOOTING DATE], [AGE] or
[TRAVEL DATE] and then press
[MENU/SET] to set each item.
[DATE STAMP]
Stamping information such as the
date on the recorded pictures
MENU
/
SET
MENU
/
SET
MENU
/
SET
DMC-FX100ENG.book 82 ページ 2007年5月16日 水曜日 午後3時22分