Filter
Top Products
Advanced (Recording pictures)
56
VQT1F52
∫ Setting the departure/return date
(e.g.: The following are examples of the
screen in normal picture mode [ ].)
1 Press [MENU/SET] and then
press 2.
2 Press 4 to select the [SETUP]
menu icon [ ] and then press 1.
3 Press 3/4 to select
[TRAVEL DATE] and then press
1.
4 Press 4 to select [SET] and then
press [MENU/SET].
5 Press 3/4/2/1 to set the
departure date and then press
[MENU/SET].
6 Press 3/4/2/1 to set the return
date and then press [MENU/SET].
• The travel date is canceled if the current
date is after the return date.
•If you do not want to set the return date,
press [MENU/SET] while the date bar is
displayed.
7 Press [MENU/SET] to close the
menu.
8 Take a picture.
A The number of days that have passed
since the departure date
•The number of days that have passed
since the departure date is displayed for
about 5 seconds if this unit is turned on
etc. after setting the travel date or when
the travel date is set.
•When the travel date is set, [ ]
appears on the lower right of the
screen. (It is not displayed if the current
date is after the return date.)
∫ Canceling the travel date
The travel date is automatically canceled if
the current date is after the return date. If
you want to cancel the travel date before
the end of the vacation, select [OFF] on the
screen shown in step
4 and then press
[MENU/SET] twice.
•The travel date is calculated using the
date in the clock setting and the departure
date you set. If you set [WORLD TIME]
(P57) to the travel destination, the travel
date is calculated using the date in the
clock setting and the travel destination
setting.
2/1: Select the desired item.
3/4: Set the year, month and date.
MENU
/
SET
MENU
/
SET
MENU
/
SET
2/1: Select the desired item.
3/4: Set the year, month and date.
A
DMC-FX100ENG.book 56 ページ ２００７年５月１６日 水曜日 午後３時２２分