Filter
Top Products
Advanced (Playback)
91
VQT1F52
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P76)
Usually, it is not necessary to format the
built-in memory and the card.
Format them when the message
[BUILT-IN MEMORY ERROR] or
[MEMORY CARD ERROR] appears.
Press 3 to select [YES] and then
press [MENU/SET].
(The illustration shows the screen when
the built-in memory is formatted.)
•When a card is not inserted, you can
format the built-in memory. When a
card is inserted, you can format the
card.
•If you press [MENU/SET] while
formatting the built-in memory, the
formatting will stop halfway. (However,
all the pictures will be deleted.)
•Formatting irretrievably deletes all the
data including any protected pictures.
Check the data carefully before
formatting.
•If the card has been formatted on a PC or
other equipment, format it on the camera
again.
•Use a battery with sufficient battery power
or the AC adaptor (DMW-AC5PP;
optional) when formatting.
•Do not turn the camera off during
formatting.
•It may take longer to format the built-in
memory than the card. (Max. about
15 sec.)
•You cannot format an SD Memory Card or
an SDHC Memory Card when the card’s
Write- Protect switch A is set to [LOCK].
•If the built-in memory or the card cannot
be formatted, consult your nearest
Service Center.
[FORMAT]
Initializing the built-in memory or a
card
MENU
/
SET
MENU
/
SET
2
For USA assistance, please call: 1-800-272-7033
or send e-mail to : digitalstillcam@us.panasonic.com
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: lumixconcierge@ca.panasonic.com
DMC-FX100ENG.book 91 ページ ２００７年５月１６日 水曜日 午後３時２２分