Filter
Top Products
Advanced (Recording pictures)
66
VQT1F52
Press [ ] to display the [REC] mode
menu and select the item to set. (P59)
∫ About the jitter/movement detection
demonstration screen
Press 1 to display [JITTER, SUBJ. MOVE
DEMO.] when the [STABILIZER] screen is
displayed. (Pictures cannot be recorded
when the [JITTER, SUBJ. MOVE DEMO.]
screen appears.)
Press 1 again to finish this mode.
A Jitter detection demonstration
B Movement detection demonstration
•The camera automatically detects the
jitter and the movement of the subject and
displays these on the indicator.
•We recommend using a bright subject
with high contrast for the subject
movement demonstration.
•The jitter/movement detection
demonstration screen is an
approximation.
•The camera also detects the movement of
the subject when automatically setting the
ISO sensitivity in intelligent ISO sensitivity
mode [ ] and [SPORTS], [BABY1]/
[BABY2] and [PET] in scene mode.
•The stabilizer function may not be
effective in the following cases.
–When there is a lot of jitter.
–When the zoom magnification is high.
–In digital zoom range.
–When taking pictures while following a
moving subject.
–When the shutter speed becomes
slower to take pictures indoors or in dark
places.
Be careful of camera jitter when you press
the shutter button.
•The setting is fixed to [MODE2] in simple
mode [ ] and [SELF PORTRAIT] in
scene mode and fixed to [OFF] in
[STARRY SKY] in scene mode.
•In motion picture mode [ ], [MODE2]
cannot be set.
[STABILIZER]
Detecting jitter and compensating
for it
[MODE1]
()
The stabilizer operates
continuously and can assist
during photo composition.
[MODE2]
()
The jitter is compensated for
when the shutter button is
pressed. There is a greater
stabilizing effect.
[OFF]
()
When the stabilizer is not
desired.
MENU
/
SET
A
B
DMC-FX100ENG.book 66 ページ ２００７年５月１６日 水曜日 午後３時２２分