Filter
Top Products
Advanced (Recording pictures)
47
VQT1B86
∫ Age display setting
•To have the age displayed, first set the
birthday and then be sure to set
[WITH AGE] before taking the pictures.
∫ Birthday setting
1 Press 3/4 to select [BIRTHDAY SET.]
and then press [MENU/SET].
2 When a message appears, press 2/1
to select items (Year/Month/Day) and
then press 3/4 to set them.
3 Press [MENU/SET] to finish the setting.
•The focus range becomes the same as
macro mode. [5 cm (0.16 feet) (Wide)/
30 cm (0.98 feet) (Tele) to ¶]
•The ISO sensitivity becomes the same as
when Intelligent ISO sensitivity mode
[ ] is set to a highest ISO sensitivity of
[ISO400]. (P41)
•If you turn on the camera in [BABY1]/
[BABY2], the age and current date and
time are displayed for about 5 seconds on
the bottom of the screen.
•The age display style differs depending on
the language setting in the recording
mode.
•If the age is not properly displayed, check
the clock and birthday settings.
•If the camera is set to [WITHOUTAGE],
the age is not recorded even if the time
and birthday are set. This means the age
cannot be displayed even if camera is set
to [WITH AGE] after taking the pictures.
•The birthday setting can be reset with
[RESET]. (P20)
•You cannot use the following functions.
–[D.ZOOM]
–[SLOW SHUTTER]
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P43)
Select this when you want to take pictures
of a pet such as a dog or a cat.
This allows you to set the birthday of your
pet. You can display the set age when
playing back the pictures and stamp the
age on the recorded pictures with [DATE
STAMP] (P75).
•The age can also be printed on each
picture by using the software [LUMIX
Simple Viewer] or
[PHOTOfunSTUDIO-viewer-] in the
CD-ROM (supplied). (For information
about printing, refer to the separate
operating instructions for PC connection.)
Refer to [BABY1]/[BABY2] (P46) for
information about age display setting and
birthday setting.
•The initial setting for the AF assist lamp is
[OFF]. (P65)
•Refer to [BABY1]/[BABY2] for other
information about this mode.
Press [ ] to display the [SCENE MODE]
menu and select a scene mode. (P43)
Select this when you want to take pictures
of sunset view. This allows you to take vivid
pictures of the red color of the sun.
•The flash setting is fixed to Forced OFF
[].
•The setting on the AF assist lamp is
disabled.
•ISO sensitivity is fixed to [ISO100].
•The white balance cannot be set.
BABY1
WITHOUT AGE
BIRTHDAY SET.
WITH AGE
SELECT SET
MENU
CANCEL
1
[PET]
[SUNSET]
/SET
MENU
/SET
MENU