Filter
Top Products
Connecting to other equipment
86
VQT1B86
∫ About motion picture playback on a
PC
Use the software “QuickTime”
(for Windows 2000/XP) in the CD-ROM
(supplied) to play back motion pictures
recorded on this camera on a PC.
•If you use “Windows 98/98SE/Me”,
download “QuickTime6.5.2 for PC” from
the following site, and install it.
http://www.apple.com/support/quicktime/
•This software is installed as standard on a
“Macintosh OS”.
∫ Folder Composition
Folders are displayed as shown in the
following illustration.
1 Folder number
2 File number
3 JPG: pictures
MOV: motion pictures
MISC: Folder containing files on which the
DPOF print settings are recorded
The items in each folder are as follows.
•The data for up to 999 pictures recorded
by the camera can be included in 1 folder.
If the number of pictures exceeds 999,
another folder is created.
•To reset the file number or the folder
number, select [NO.RESET] in the
[SETUP] menu. (P19)
∫ Conditions under which a different
folder number is used
In the following cases, the picture is not
recorded in the same folder as the
previously recorded picture. It is recorded
in a folder with a new number.
1 When the folder just recorded to contains
a picture file with the number 999 in it
(example: P1000999.JPG).
2 When the card just recorded to contains,
for example, a folder with the number
100 [100_PANA] in it and that card is
removed and replaced with a card that
has a folder with the number 100 in it
recorded by a camera from a different
maker (100XXXXX, with XXXXX being
the name of the maker) and then a
picture is recorded.
3 When recording after selecting
[NO.RESET] (P19) from the [SETUP]
menu. (Pictures will be recorded to a
new folder with a number sequential to
the folder recorded to immediately
before. By using [NO.RESET] on a card
that does not contain folders or pictures,
such as one just formatted, the folder
number can be reset to 100.)
∫ About the PTP connection
If the OS is “Windows XP” or “Mac OS X”,
you can connect in PTP mode if you set the
camera to [ ] mode and then connect to
your PC.
•Pictures can only be read on the camera.
They cannot be written to a card or
deleted.
•When there are 1000 or more pictures on
a card, the pictures may not be imported.
100_PANA
101_PANA
999_PANA
DCIM
MISC
P1000001.JPG
P1000002.JPG
P1000999.JPG
100_PANA
1
23
≥Built-in memory
≥
Card