Filter
Top Products
17
VQT1C63
Preparation
Setting Date/Time (Clock Set)
Set the mode dial to [ ].
■ Initial setting
The clock is not set when the camera is
shipped. When you turn the camera on,
the following screen appears.
A: [MENU/SET] button
B: Cursor buttons
C: Mode dial
1 Press [MENU/SET].
2 Press e/r/w/q to select the date.
D: Time at the home area
E: Time at the travel destination (P57)
• w/q : Select the desired item.
• e/r : Set date and time.
• A : To cancel without setting the
clock.
3 Press [MENU/SET].
• When you fi nish setting the clock, switch
the camera off, then switch it on in
recording mode to check that the clock is
set correctly.
Changing the clock setting
1 Press [MENU/SET].
2 Press e/r to select [CLOCK SET]
(P66).
3 Press q and perform the above steps 2
and 3 for setting.
4 Press [MENU/SET] to close the menu.
• You can set the clock from the setup
menu (P21).
• When batteries have been inserted for
more than 3 hours, the clock setting is
stored in the camera for approximately 3
months even if the batteries are removed.
• You can set the year from 2000 to 2099.
The 24-hour system is used.
• Set the date so that the correct date is
printed when you order prints or use the
date stamp (P75).
A
B
C
PLEASE SET THE CLOCK
3
CLOCK SET
MENU
:..
D
E
:
:
3
CLOCK SET
SELECT
EXIT
0
SET
CANCEL
M/D/Y
00 JAN 1 2007