Filter
Top Products
89
VQT1C63
Connecting to other equipment
3 Press e to select [PRINT START]
and then press [MENU/SET].
•
In DPOF setting, [PRINT WITH DATE] and
[NUM. OF PRINTS] are not displayed.
• When you select [DPOF PICTURE],
[DPOF SET] is selectable. When you
select [DPOF SET], refer to P77.
• Press [MENU/SET] when you wish to
cancel printing halfway.
• When you select [MULTI SELECT],
[SELECT ALL] or [FAVORITE], the print
confi rmation screen appears. Select
[YES] and perform printing.
• When the number of prints exceeds
1,000, [PRINTING --- PICTURES DO
YOU WANT TO PROCEED?] appears on
the print confi rmation screen.
4 Disconnect the USB connection
cable after printing.
■ Setting date printing, the number of
prints, the paper size and the page
layout
• Select an item to set on the screen for
step 2 in “Printing the selected picture
(making a single print)” (P88) or on the
screen for step 3 in “Selecting multiple
pictures for printing” (P88, 89).
• When you want to print pictures in
a paper size or a layout which is not
supported by the camera, set [PAPER
SIZE] and [PAGE LAYOUT] to [
F] and
then set the paper size or the layout
on the printer. (For details, refer to the
operating instructions of the printer.)
• [PRINT WITH DATE]
OFF Date is not printed.
ON Date is printed.
• If the printer does not support date
printing, the date cannot be printed on
the picture.
• [NUM. OF PRINTS]
Set the number of prints.
• You can set up to 999 prints.
• [PAPER SIZE]
(Possible paper sizes on the camera)
The items are listed on 1/2 and 2/2.
Press r to select the desired item.
1/2
F
Settings on the printer are
prioritized.
L/3.5˝ × 5˝ 89 mm × 127 mm
2L/5˝ × 7˝ 127 mm × 178 mm
POSTCARD 100 mm × 148 mm
A4 210 mm × 297 mm
2/2*
CARD SIZE 54 mm × 85.6 mm
10 × 15cm 100 mm × 150 mm
4˝ × 6˝ 101.6 mm × 152.4 mm
8˝ × 10˝ 203.2 mm × 254 mm
LETTER 216 mm × 279.4 mm
* These items cannot be displayed when
the printer does not support the paper
sizes.
MENU
SET
1
MENU
MULTI SELECT
PRINT START
PRINT WITH DATE
NUM.OF PRINTS
PAPER SIZE
PAGE LAYOUT
SELECT SETCANCEL
A
OFF