Filter
Top Products
84
VQT1C63
Connecting to other equipment
Connecting to a PC
•
By connecting the camera to a computer,
you can upload your pictures, then use the
software on the included CD-ROM ([LUMIX
Simple Viewer] and [PHOTOfunSTUDIO-
viewer-] for Windows
®
) to print or send your
images by e-mail.
• If you use Windows 98/98SE, install
the USB driver and then connect the
camera to the computer.
• For details about installing [LUMIX
Simple Viewer] or [PHOTOfunSTUDIO-
viewer-] etc., refer to the separate
operating instructions for PC connection.
A : AC adaptor (DMW-AC6; optional)
•
Use batteries with suffi cient battery power (P24)
or the AC adaptor (DMW-AC6; optional).
• Make sure this unit is off before
connecting or disconnecting the AC
adaptor (DMW-AC6; optional).
B : USB connection cable (supplied)
C
: This message appears during data transfer.
D : Check the facing of the connector and
push straight in.
• Set the camera’s mode dial to a mode
other than Print mode [ ].
1 Turn on the camera and the PC.
2 Connect the camera to a PC via
the USB connection cable B
(supplied).
• Connect the USB connection cable with
the [c] mark facing the [q] mark on
the [DIGITAL] socket.
• Hold D and then insert or pull the USB
connection cable straight. Do not try
to force the connector in backwards or
sideways. This can damage this unit and
the equipment you are connecting.
[Windows]
The drive appears on the [My Computer]
folder.
• If it is the fi rst time you are connecting
the camera to a PC, the required driver is
installed automatically so that the camera
can be recognized by the Windows Plug
and Play, then it appears on the [My
Computer] folder.
[Macintosh]
The drive is displayed on the screen.
•
The drive is displayed as [LUMIX] when you
connect the camera with no card inserted.
• The drive is displayed as [NO NAME] or
[Untitled] when you connect the camera
with a card inserted.
■ Motion picture playback on a PC
Use “QuickTime” (for Windows 2000/XP) in
the supplied CD-ROM when you play back
motion pictures recorded on this camera
on your PC.
• Download [QuickTime6.5.2 for PC] from
the following website and install it on your
PC when you use Windows98/98SE/Me.
http://www.apple.com/support/quicktime/
• The software is a standard Macintosh
feature.
B
A
C
DIGITAL
V.OUT
DC IN
3V
D
ACCESS