Filter
Top Products
- 14 -
Inserting/removing a microSD card
Caution:
Check that the access lamp A has gone off.
≥ When this unit is accessing the microSD card (such as recognition, recording, playback and
deletion), the access lamp lights up.
C: Unlocked when the red indicator is visible
1 Slide the LOCK switch B to the left to unlock the side cover and
slide the side cover downward to open it and then insert (remove)
the microSD card into (from) the card slot.
≥ Face the terminal side D upward and press it straight in as far as it will go.
≥ Press the centre of the microSD card and then pull it straight out.
2 Close the side cover and slide the LOCK switch B to the right to
lock it.
≥ Close the side cover and slide it upward and then lock it.
≥ Securely close it until it clicks.
≥ When the microSD card is removed, a notification sound emits, and the access lamp flashes fast.
(a state in which a microSD card is not inserted)
≥ Do not touch the terminals on the back of the microSD card.
≥ For handling of microSD card, refer to page 59.
≥ If you insert or remove the microSD card while this unit is in playback mode, Wi-Fi mode
will turn off and this unit will lose the connection.
∫ About the access lamp
≥ When the access lamp is lit, do not:
jRemove the microSD card
jTurn this unit off
jInsert and remove the USB cable
jExpose this unit to vibrations or shock
Performing the above while the lamp is on may result in damage to data/microSD card or this
unit.
When using a microSD card not from Panasonic, or one previously used on other equipment, for
the first time on this unit, format the microSD card. (l 21) When the microSD card is formatted,
all of the recorded data is deleted. Once the data is deleted, it cannot be restored.
A
B
D
C
HX-A100_VQT4X97.book 14 ページ ２０１３年２月１４日 木曜日 午後２時１６分