Panasonic HX-A100 Film Camera User Manual


 
- 8 -
1 Power lamp (l 12, 15)
2 Access lamp (l 14)
3 Wi-Fi
®
/WPS button [ ] (l 17, 35, 40,
41, 53)
Wi-Fi mode lamp (l 17, 35, 40, 41, 53)
Switches to Wi-Fi mode. Each press of the
button switches the lamp.
[ ]: Smartphone mode
[ ]: Live broadcasting mode
[ ]: Access point mode
Off: Wi-Fi mode is turned off
4 Wi-Fi Transmitter
5 Power button [ ] (l 15, 53)
6 Recording start/stop button (l 22)
7 Photoshot button [ ] (l 22)
8 Hold button [ ]
Hold lamp []
9 Camera (l 10)
10 Lens (l 4)
11 Mic
12 Camera/main unit connection cable
This cable is not removable.
13 Speaker
14 LOCK switch (l 4, 11, 14)
15 Side cover (l 4, 11, 14)
16 USB terminal [ ] (l 11)
17 Reset button [RESET]
If this unit fails to operate correctly, such as
when this unit cannot be turned on/off, press
the reset button by using a paper clip or a
similar object.
18 Card slot (l 14)
Names and Functions of Main Parts
9
10
11
12
13
15
14
5
6
7
8
3
4
2
1
16 17 18
Main unit
Camera
unit
Hold function
The lock lamp [ ] lights up, and the
operation buttons on this unit are locked.
Even when the operation buttons are
locked, you can perform operation from a
smartphone. (when connected to Wi-Fi)
Press and hold the
button for approx.
2 seconds.
To release the Hold function:
Press and hold the button for approx.
2 seconds when the Hold function is
activated.
Even when the operation buttons are
locked, you can perform operation by
pressing any of them while pressing and
holding the hold button [ ].
HX-A100_VQT4X97.book 8 ページ 2013年2月14日 木曜日 午後2時16分