Filter
Top Products
- 36 -
Enter SSID (Wireless network name) and password of your access point to connect this unit to the
access point.
1 Check the SSID and password of your access point.
≥ The SSID and password of the access point (e.g. a wireless router) you use are described on the
access point device or in its manual. For details, refer to the access point manual.
2 Tap # [Camera Wi-Fi settings] # [Live mode settings] # [Set
connect. dest.] on the Image App screen and enter the SSID and
password of your access point (Step1).
3 Press the Wi-Fi/WPS button continuously to change
the Wi-Fi mode lamp to [ ].
≥ The Wi-Fi mode lamp [ ] flashes. (“1 Beep” sounds 8 times.)
≥ When “2 Beeps” sound 8 times, the connection is completed.
∫ About the connection destination in Live broadcast mode
You can register up to three SSIDs for live broadcasting (step 2)
When perfoming a live broadcast, a connection attempt will be made with the first SSID, and if it
fails, an attempt will be made with the second one, and so on.
≥ From [Live mode settings] # [Set connect. dest.], the following can be set.
jChanging the priority order of the SSIDs for live broadcasting
jDeleting connection destinations
≥ To disconnect from the access point, press the Wi-Fi/WPS button and turn off the Wi-Fi mode
lamp.
≥ When the Wi-Fi mode lamp of this unit switches, the connection between this unit and the
smartphone is cancelled.
Entering SSID to connect to an access point
Preparation: Connect this unit with the smartphone. (l 17)
HX-A100_VQT4X97.book 36 ページ ２０１３年２月１４日 木曜日 午後２時１６分