Filter
Top Products
- 31 -
“LUMIX CLUB” settings
If you intend to broadcast a live motion picture or use WEB services with an iOS device, you are
required to register “LUMIX CLUB” and WEB services you use because uploading or live
broadcasting is done via “LUMIX CLUB”.
Perform service user registration (free of charge) for the “LUMIX CLUB”, acquire a login ID, and set
the registered content on this unit.
1 When this unit and a smartphone are connected directly (l 17), turn
off the Wi-Fi setting of the smartphone to make the internet
connection available.
≥ When using an access point connection (l 41), proceed to step 2.
2 Tap # [Playback settings] # [LUMIX CLUB settings] # [Start
LUMIX CLUB function use]
on the Image App screen to set ON.
≥ If a login ID for the “LUMIX CLUB” has already been acquired on a PC, etc., the acquired login ID
can also be used.
3 Tap [Sign up].
4 Read through the [LUMIX CLUB] terms of use, and tap [Agree].
5 Enter the password on the next screen. # Tap [Register].
≥ After the login, complete the registration according to the on-screen instructions. (When using an
access point connection (l 41), step 6 is not required.)
6 Close (or hide) the Image App, turn on the Wi-Fi setting, and connect
this unit and smartphone. (l 17)
Check the following site for supported WEB services.
http://lumixclub.panasonic.net/eng/c/
1 When this unit and a smartphone are connected directly (l 17), turn
off the Wi-Fi setting of the smartphone to make the internet
connection available.
≥ When using an access point connection (l 41), proceed to step 2.
2 Acquire login information (login ID, password, etc.) on the WEB
service you want to use.
3 Tap # [Playback settings] # [LUMIX CLUB settings] # [Regist.
WEB Service] # any WEB services you want to use on the Image
App screen, enter the login information acquired in Step2 and then
complete the registration.
≥ Follow on-screen instructions to register.
Registering “LUMIX CLUB”
Registering WEB services
HX-A100_VQT4X97.book 31 ページ ２０１３年２月１４日 木曜日 午後２時１６分