Filter
Top Products
Operating Instructions
100
Wall Mounting
1) Mount the Flexible Stand firmly to the wall or the beam using the three
screws (accessories). Set the Flexible Stand 240 mm (9.5 inches) away
from the ceiling.
• Use proper screws fit for the material of the wall.
2) Attach Network Camera by screwing the threaded mount into the tripod
mounting hole. Mounting hole on the rear side is also available.
3) Adjust the position of Network Camera and secure the Flexible Stand
firmly.
4) Roll up the cables and Flexible Stand with the tape (customer
provided).
1) 2)
3) 4)
Tape
(Customer provided)
240 mm
(9.5 inches)