Filter
Top Products
Operating Instructions
[For assistance, please call: 1-800-272-7033] 15
Fixed Focus Lens and Pan/Tilt operation
Fixed Focus Lens can move in the Pan/Tilt operation. Operation Bar on the Single
Camera screen can operate the Pan/Tilt. The Pan/Tilt moves the lens 120°
horizontally and 45° vertically. Refer to page 46 for the operation bar.
Notes
• Do not force to move the lens part around the Fixed Focus Lens.
Compulsive touching may damage the Pan/Tilt motor.
• Do not touch the Fixed Focus Lens. Touching it may leave a fingerprint and
can cause the image to be out of focus. This can also take away the
protective coating on the Fixed Focus Lens.
1.3.2 Rear View
1.3.3 Bottom View
External I/O
(Refer to
page 102.)
DC IN jack
(Refer to
page 20.)
Ethernet port
(RJ-45)
(Refer to
page 20.)
Hook for AC
adaptor cord
(Refer to
page 97.)
Antenna
(Refer to page 96.)
CLEAR SETTING button
(Refer to page 108.)
Mounting Hole for the various
mounting. (Refer to page 101.)
Serial Number and
MAC address
Record the serial number and
MAC address on Network
Camera Memo on page 3. They
are indispensable for setting
network parameters after
mounting Network Camera and
for future customer servicing.
(Refer to page 29.)
Tripod Mounting Hole
(Refer to page 99.)