Filter
Top Products
18
VQT2Z87
Using the timer
The power is automatically turned on at the set time and
photos or audio are played. The power is automatically
turned off at the end time.
“Timer 1”, “Timer 2” and “Timer 3” can be set.
The following explains the case when setting “Timer 1” as an
example.
Set the clock. (¼P7)
Select the photo category.
Prepare playback sources on an iPod/iPhone.
1. Press [MENU].
2. Press [e, r, w, q] to select “Settings Menu” and
press [OK].
3. Press [e, r, w, q] to select “Timer” and press
[OK].
4. Press [w, q] to select “Timer 1 Settings” and
press [OK].
Timer Setting Menu
Select Item
OK
Timer 1 Settings
Timer 2 Settings Timer 3 Settings
AM12 PM12 3 6 6 9 3 9
Sun
Mon
Tue
Thu
Fri
Sat
Wed
5. Press [e, r] to select “Standby” and press [OK].
6. Press [e, r] to select “Enable This Timer” and
press [OK].
7. Press [e, r] to select “Day” and press [OK].
8. Press [e, r] to select the day, add the check mark
with [w, q] and press [OK].
9. Press [e, r] to select “Time” and press [OK].
10. Press [e, r, w, q] to set the start/end time and
press [OK].
11. Press [e, r] to select “Confi rm” and press [OK].
If the operation time overlaps other timer settings,
“The set time overlaps with another timer. Do you want
to give priority to this timer and register it?” appears.
If “Yes” is selected, other timers with the overlapped
time are disabled.
If “No” is selected, the previous screen is restored
with the timer setting contents saved.
Timer 1 Settings
Select Item
OK
Day
Time
Standby
Enable
Off
Mon Tue Wed Thu Fri
7 : 00 AM - 10 : 00 AM
Audio Playback
Confirm
A
A To set audio playback ¼ P19
•
•
12. Press [MENU] to close the menu screen.
•
•
•
Audio playback settings
You can make the settings for display at the time of audio
playback of the iPod/iPhone. You can also set the sound
quality for your preference.
Basic operation
1. Press [MENU].
2. Press [e, r, w, q] to select “Audio Menu” and
press [OK].
Select Item
Menu
OK
Audio Menu
Settings Menu
3. Press [e, r] to select the item (¼below) and
press [w, q] to select the setting.
4. Press [MENU] to close the menu screen.
Factory settings are indicated with underlines.
Play Mode
¼P17
Repeat
¼P17
Audio Information
Displays audio information
currently playing while the display
categories other than “iPod
Display” are set.
On: Display
Off: No display
Equalizer
Flat:
When the sound quality effect is
not used.
Heavy:
Emphasizes the bass sound with
sharp sound quality.
Clear:
Emphasizes the treble range with
clear sound quality.
iPod Information
Displays the model name and
version of the connected
iPod/iPhone.