Filter
Top Products
Before using
15
LSQT0862
The one-touch free-style grip belt
ª To use as a hand strap
If you use the grip belt as a hand strap, then you
can carry or handle this Camcorder more easily.
1 Open the lock cover 1 by pinching the
projections 2 on both sides. Press the lock
button 3 to remove the grip belt.
≥When removing the grip belt, tightly hold the
Camcorder with both hands.
≥After removing the grip belt, restore the lock
cover to the original position.
2 Adjust the belt length.
1 Flip the belt.
2 Slide 1 in the direction indicated by the arrow.
3 Fix the belt.
3 Put your hand through the strap.
≥Use the Magic Wire Remote Control with
Narration Mic for more convenience.
≥Hold the Camcorder without covering the
microphones or the sensors with your hands.
ª
To restore the strap to the grip belt
≥When returning the grip belt to the grip belt
attachment, press the lock cover 1 and check if
the grip belt is securely locked.
ª
To use as a grip belt
Adjust the belt length so it fits your hand.
1 Adjust the belt length and the pad position.
1 Flip the belt.
2 Adjust the length.
3 Fix the belt.
Using the LCD monitor
You can record the image while viewing it on the
LCD monitor.
1 Put a finger on the LCD monitor release and
pull the LCD monitor out in the direction of
the arrow.
≥The viewfinder is now deactivated.
≥It can open up to 90o.
2 Adjust the angle of the LCD monitor
according to your preference.
≥It can rotate up to 180o 1 towards the lens or
90o 2 towards the viewfinder.
≥The brightness and color level of the LCD
monitor can be adjusted from the menu.
≥If it is forcibly opened or rotated, the Camcorder
may be damaged or fail.
≥Check that the card slot cover is closed.
≥When the LCD monitor is rotated by 180o
towards the lens (when recording yourself), the
LCD monitor and the viewfinder will be
simultaneously activated.
2
1
3
1
3
2
1
1
1
3
2
2 90o1 180o
LSQT0862ENG.book 15 ページ ２００４年１２月２１日 火曜日 午後５時９分