Filter
Top Products
Others
69
LSQT0862
Functions cannot be used
simultaneously
Some functions in the Camcorder are disabled or
cannot be selected due to its specifications. The
table below shows examples of functions
restricted by conditions.
Functions Conditions which disable
the functions
≥Progressive ≥When recording onto a
tape and a card
simultaneously
≥When digital zoom
(10k or higher) is used
≥When the shutter speed is
1/750 or faster in Tape
Recording Mode
≥When the gain value is
increased in Tape
Recording Mode
≥When brightness is
insufficient with the flash
[ ] in Tape Recording
Mode
≥When the MagicPix
function is used
≥When the portrait mode of
the scene mode is used in
Tape Recording Mode
≥When the wide mode is
used
≥Digital zoom
≥Wide mode
≥Fade
≥When the Card Recording
mode is used
≥Backlight
compensation
≥When the iris/gain is set
≥When the MagicPix
function is used
≥Soft skin
≥Tele-macro
≥Recording
check
≥While recording to a tape
≥MagicPix ≥While recording to a tape
≥When the Card Recording
mode is used
≥RapidFire
Consecutive
Photoshot
≥When [PICTURE SIZE] is
set to other than [640]
≥When the shutter speed is
1/15 or slower
≥Flash ≥While recording to a tape
≥During demo mode
≥When RapidFire
Consecutive Photoshot is
used
≥When the MagicPix
function is used
≥Zoom
microphone
≥Wind noise
reduction
≥When the microphone of
the Magic Wire Remote
Control with Narration Mic
or an external microphone
is used
≥Scene mode ≥When setting the [AUTO/
MANUAL/FOCUS] switch
to [AUTO]
≥When the MagicPix
function is used
≥Change of
white balance
≥When digital zoom (10k
or higher) is used
≥When the MagicPix
function is used
≥When the shutter speed is
1/15 or slower in the Card
Recording mode
≥When a menu is
displayed
≥Adjusting the
shutter speed,
iris/gain
≥When the MagicPix
function is used
≥When the scene mode is
used
≥Variable-speed
search
≥During repeat playback
≥Deleting files ≥When the write protect
switch on the card is set
to [LOCK]
≥When the file is protected
≥Formatting ≥When the write protect
switch on the card is set
to [LOCK]
≥Audio dubbing ≥The section of a tape
recorded in LP mode
≥The blank section of a
tape
≥Sounds sent through the
DV terminal
LSQT0862ENG.book 69 ページ ２００４年１２月２１日 火曜日 午後５時９分