Before using
16
LSQT0862
Using the viewfinder
ª Extending the viewfinder
1 Pull out the viewfinder and extend it by
pulling the extension knob.
ª
Lifting up the viewfinder
1 Lift it up by pinching the viewfinder
extension knob.
ª
Adjusting the field of view
1 Adjust the focus by sliding the eyepiece
corrector knob.
≥You can adjust the brightness of the viewfinder
from the menu.
Power supply
ª Charging the battery
When this product is purchased, the battery is not
charged. Charge the battery before using this
product.
≥Battery charging time (
-17-)
≥We recommend using Panasonic batteries.
≥If you use other batteries, we cannot guarantee
the quality of this product.
≥If the DC input lead is connected to the AC
adaptor, then the battery will not charge.
Remove the DC input lead from the AC adaptor.
1 Connect the AC cable to the AC adaptor and
the AC jack.
2 Put the battery on the battery mount by
aligning the mark, and then securely plug it
in.
ª
Charging lamp
Lights up: Charging
Goes off: Charging completed
Flashing: The battery is over discharged
(discharged excessively). In a while,
the lamp will light up and normal
charging will start.
When the battery temperature is
excessively high or low, the [CHARGE]
lamp flashes and the charging time will
be longer than normal.
12:30:45PM
OCT 15 2005
12:30:45PM
OCT 15 2005
12:30:45PM
OCT 15 2005
12:30:45PM
OCT 15 2005
LSQT0862ENG.book 16 ページ 2004年12月21日 火曜日 午後5時9分