Filter
Top Products
With a PC
53
LSQT0862
≥Click [Next] and proceed with installation.
≥After completing the installation, Click
[Finish].
6 After the USB Driver is installed, please
restart your computer.
≥Reboot the computer to finish installing USB
driver.
≥Installation continues after the computer
reboots if you selected additional software.
≥A message indicating a conflict between
versions may be displayed during the
installation. This will not cause a problem.
Simply click [Yes] to proceed with the
installation.
Connecting Computer and
Camcorder
When your OS is Windows 98SE, install USB
Driver before connecting.
Never connect the USB cable until the USB
Driver is installed.
Before making these connections, turn off all
devices, which are to be connected.
≥It is recommended that you use the AC Adaptor
as the power supply of the Camcorder.
ª
Using Built-in SD Drive
By connecting the Camcorder and personal
computer with the USB cable, you can transfer
still images saved on a Memory Card directly to
your personal computer.
1 Insert the Memory Card into the Camcorder.
2 Set the Camcorder to PC Mode.
3 Connect the Camcorder to your personal
computer with the USB cable.
4 Open [My Computer] and click
[Removable Disk] (For Windows 98SE/Me/
2000 users).
Click [Open folder to view files using
Windows Explorer] and then [OK] (For
Windows XP users).
5 Double-click a file you want to view.
6 Camcorder power is turned on.
≥You can view images stored on the Memory
Card and also save them to your hard disk.
≥Do not change file or folder names on the
personal computer. The images on the
Memory Card may not be viewable on the
Camcorder.
≥Appropriate driver to recognize Camcorder is
automatically installed by Windows Plug and
Play when connected for the first time.
≥After the USB Driver is installed and USB
connection cable is connected to the
Camcorder, open [My Computer] or
[Windows Explorer] to check that the drive is
displayed as a removable disk drive (only when
card is inserted into the Camcorder). It enables
you to operate it in the same way as a floppy
disk drive, and you can use the same drag and
drop or copy methods.
Using as a Web camera
If the Camcorder is connected to your personal
computer, you can send video and sound from
the Camcorder to other parties via the network.
Note:
≥Do not connect the USB cable until the Video
Stream Driver is installed.
This feature can be used only if both parties
are using the same operating system. Please
see chart below:
ª
Operating environment
OS:
IBM PC/AT compatible personal computer with
preinstalled
Microsoft Windows XP Home Edition/
Professional SP1 or later
Microsoft Windows 2000 Professional SP4 or
later
Microsoft Windows Me (Millennium Edition)
Microsoft Windows 98 Second Edition
CPU:
Intel Pentium III 450 MHz or higher
Celeron 400 MHz or higher (including compatible
CPU)
PC
[Send] [Receive] [Software]
Windows XP <OK> Windows XP Windows
Messenger
Windows XP <NG> Windows
98SE/Me/
2000
Windows
98SE/Me/
2000
<OK> Windows
98SE/Me/
2000
MSN
Messenger
LSQT0862ENG.book 53 ページ ２００４年１２月２１日 火曜日 午後５時９分