Panasonic PV-DV402 Camcorder User Manual


 
32
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Playback Your Recordings
1
Set the POWER to VCR.
The POWER lamp lights red.
Be sure POWER is fully turned to the
VCR position.
2
Press LCD-OPEN to unlock the LCD
monitor and swing open.
3
Press (REWIND/SEARCH) to
rewind the tape.
4
Press (PLAY) to start playback.
5
Press (STOP) to stop playback.
When the tape reaches its beginning
during rewind or rewind search, it will
stop automatically.
Playback using the LCD
Monitor
You can also use the LCD monitor to
playback your recording.
Note
PHONE Jack
Before you begin
Connect the Palmcorder to a power
source. (pp. 14, 15)
Insert a recorded cassette.
When a tape recorded in LP mode on
another digital video camera is played
back on this unit, the picture may appear
mosaic.
Using the LCD monitor reduces battery
operating time.
You can place the Palmcorder on a table,
etc. for viewing. Rotate the LCD Monitor
180° and swing it up against the
Palmcorder body as shown.
5
STOP
4
PLAY
3
REWIND SEARCH
2
LCD-OPEN
180°
90°
90°
1
POWER
You can connect earphones (not supplied)
to the PHONE Jack.
Connecting Earphone
(not supplied)
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
36