98
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
If you have a problem with your Palmcorder, it may be something you can correct
yourself.
Check the list below for symptoms and corrections.
No picture in the EVF or LCD Monitor...
Video cassette cannot be inserted...
Video cassette cannot be removed...
No operation starts when operation
buttons are pressed...
Recording cannot be done...
Auto Focus does not operate...
Sound from microphone cannot be
monitored...
Sound cannot be heard...
Symptom
• Make sure the Power Source is connected.
(pp. 14, 15)
• Make sure the POWER switch is set to VCR
or CAMERA. (pp. 18, 32)
• Check the Dew Indicator. (p. 99)
• Make sure the Battery is fully charged.
(p. 14)
• Make sure all necessary cables are
connected correctly and firmly. (p. 15)
• Make sure the Lens Cap is removed. (p. 18)
• Make sure the Power Source is connected.
(pp. 14, 15)
• Insert the cassette record tab up, window
side facing out. (p. 11)
• Make sure the Power source is connected.
(pp. 14, 15)
• Check the Dew Indicator. (p. 99)
• Make sure the record tab is closed. (p. 7)
• Check the Battery Indication. (p. 112)
• Make sure FOCUS is set to AUTO. (p. 29)
• Make sure the unit is ON and set to
CAMERA mode. (p. 18)
• Make sure the unit is set to REC or REC/
PAUSE mode.
• Make sure the Audio on the VCR MENU is
set to ST1. (pp. 44, 110)
Correction
Before Requesting Service
PV-DV52 / PV-DV52-S / PV-DV102 / PV-DV202 / PV-DV402
102