Filter
Top Products
11
VQT0T50
26 LCD monitor (P21, 107)
27 Power LCD button [POWER LCD] (P30)
28 Reset button [RESET] (P101)
29 Card access lamp [ACCESS] (P15)
30 Card slot open lever (P14)
31 Card slot cover (P14)
32 Strap fixture (P12)
Lens hood
1In order to remove the lens
hood, rotate it
counter-clockwise.
2In order to fit it, put into slot A,
and then rotate it clockwise.
Tripod mount
This is a hole for attaching this unit to a tripod
(optional). (Please carefully read the operating
instructions for how to attach the tripod to the unit.)
This unit does not have a hole for a tripod pin so
attach it to a tripod without a tripod pin. If you try to
forcibly attach this unit to a tripod with a fixed tripod
pin, this unit may get scratched or damaged.
≥ When a tripod is used, you can perform
operations easily using the remote control.
≥ When the tripod is used, the card slot cover and
battery cover cannot be opened. Insert an SD card or the battery before attaching
this unit to the tripod. (P14, 16)
1 Camera base
26
27
30
31
32
29
28
Due to limitations in LCD production
technology, there may be some tiny bright or
dark spots on the LCD monitor screen.
However, this is not a malfunction and does
not affect the recorded picture.
VQT0T50_PP_ENG.book 11 ページ ２００５年８月３１日 水曜日 午後２時２５分