Filter
Top Products
37
VQT0T50
∫ To use the zoom microphone function
Interlocked with the zooming operation, the microphone will collect sounds clearly far
away with the tele-shot or those in the vicinity with the wide-angle shot.
¬Rotate the mode dial to select .
Press the menu button, then use the
cursor button to select
[ ADVANCE]>[ ZOOM MIC]>[ON].
(P26)
By focusing only on the subject and blurring the background, the image can be
impressive. This unit can focus on the subject at a distance of approx. 50 cm (20 inch).
¬
Rotate the mode dial to select or .
1 Press the button in the center of the
cursor button to display the icon
shown in the illustration.
2 Press the cursor button
up,
then
select the [ ] tele-macro icon.
≥ If the magnification is 10k or less, then it is
automatically set to 10k.
≥ The
[] icon flashes orange, then lights
white.
To cancel the tele-macro function
Select the [ ] icon again.
MENU
SETUP ENTER
EXIT
D.ZOOM
REC LAMP
ZOOM MIC
ADVANCE
OFF
ON
MAGICPIX
O.I.S.
Tele-macro function
This is for
bringing only what you want to record into focus to take close-ups.
≥ If a sharper focus cannot be achieved, adjust the focus manually. (P45)
≥ In the following cases, the tele-macro function is canceled automatically.
–The zoom magnification becomes lower than 10k.
–The power is turned off or the mode dial is set to a mode other than motion picture
recording mode or still picture recording mode.
VQT0T50_PP_ENG.book 37 ページ ２００５年８月３１日 水曜日 午後２時２５分